Connector and Cable Assembly Supplier

Multi-Conductor

Multi-Conductor News
Featured news

Product News for March 28, 2016

The latest product announcements for March 28, 2016, cover the breadth of applications from broadcast to wireless access points to electric cars. Artos Engineering launched the PF-11 light-wire prefeeder. Designed for maximum productivity even at high speeds, it provides superior tangle-free feeds of small-gauge loose-coil wire up to 5.5mm (.22 inch) in diameter. The PF-11 Read More >>

LEMO and Northwire

Complex Underwater Connectivity Calls for Custom Solutions

Since more than 71% of the earth’s surface is covered by water, it’s no surprise it is responsible for an abundance of application failures. To ensure success, improve your risk assessment of off-the-shelf parts and learn how custom designs help navigate complex environmental factors.   Sometimes focusing on hurdle rates, internal rate of return, and Read More >>

Featured news

ITT Cannon Receives EN3645 Certification for D38999 Series III

ITT Cannon received European standard certification for aluminum and composite D38999 Series III circular connectors, certified in the United States under MIL-DTL-38999.    ITT Cannon’s D38999 Series III circular connectors have received European standard certification (EN3645). The certification was received after rigorous testing, site audits, and data collection by the AeroSpace and Defence Industries Association of Read More >>

DesignCon ChipHead

DesignCon 2016 Technology Wrap-Up

DesignCon 2016 featured 33 interconnect manufacturers, all concentrating on ever-higher speeds and improved signal integrity.   DesignCon 2016 opened in the shadow of preparations for Super Bowl 50 at Levi’s Stadium, directly across the street from the Santa Clara Convention Center. With more than 160 exhibitors and 4,800 pre-registered attendees, the exposition and conference continues Read More >>

DesignCon ChipHead

Interconnect News from DesignCon

If you weren’t lucky enough to attend DesignCon, here’s your guide to the major product announcements made at the show.   DesignCon 2016 is in the books, and the show did not disappoint when it came to showcasing the latest technology. TE Connectivity TE Connectivity showed a range of industry-leading data communications connectivity solutions, with Read More >>

DesignCon ChipHead

Gettin’ Down on the Show Floor: DesignCon 2016

The DesignCon show floor opens today, so we spoke with some of the exhibitors to find out what they expect will be the hot technologies in this year’s Expo Hall.   Did you enjoy your workshops and survive your bootcamps? Well, slip on your walking shoes because the DesignCon show floor opens today, and there is so much Read More >>

Cable Connectivity for Variable Frequency Drives

The VFD cable is often an afterthought in the exhaustive research and consultation process to choose an advanced variable frequency drive. Here, Wayne Spence of Amphenol Sine explains why it is critical to the overall system.     The phone rings; your chest begins to pound, and the receiving manager’s voice confirms it’s the moment you’ve long Read More >>

CableEye CB46 cable tester

Diagnose Fatigue-Induced Failure in Cables in Motion

A major concern in robotics applications, cables in motion experience fatigue that can cause failures whether or not that motion is constant. Cable and harness test systems can help identify the source.   Cables in motion experience fatigue that can cause complete or intermittent failures, whether or not that motion is constant. Cable and harness Read More >>

TE Mini-SAS high-density (HD) connector and cable assemblies

TE’s 192Gb/s Internal Mini-SAS Connector and Cable Assembly

TE’s 192Gb/s internal Mini-SAS connector and cable assembly meets high-density, high-speed SAS 2.1 and SAS 3.0 specifications and saves valuable PCB and cable routing space. TE Connectivity introduced its new internal Mini-SAS high-density (HD) connector and cable assemblies – a high-speed interface capable of transferring data at 192Gb/s (12Gb/s x 16 lanes). The product is designed to Read More >>

Yamaichi Cable Assemblies

Yamaichi Y-Con Cable Assembly Product Line

The Yamaichi Y-Con cable assembly product line includes adapter cables with M12 and push-pull connectors that terminate to RJ45 and USB interfaces.  Yamaichi Electronics’ Y-Con product line provides adapter cables with M12 or push-pull connectors that connect to RJ45 or USB interfaces. All the required connector components are available on-site at Yamaichi, so the entire cable assembly can be manufactured at a single production location. Yamaichi Electronics Read More >>